+
  • 骨料提升机.png

Aggregate elevator


Outline

The driving power is small, and the dense arrangement of inflow feeding, induction unloading and large capacity hopper is adopted During material lifting, there is almost no material return and excavation, so the ineffective power is less.

Classification

Aggregate Elevator

key word

  • Aggregate Elevator | Powder Elevator | Mixer Humidification
Message

Product Details


  Driving power

  The driving power is small, and the dense arrangement of inflow feeding, induction unloading and large capacity hopper is adopted During material lifting, there is almost no material return and excavation, so the ineffective power is less.

  Lifting range

  The lifting range is wide. This kind of elevator has few requirements on the types and characteristics of materials. It can not only lift general powdery and small granular materials, but also lift materials with high grinding and chipping Good sealing performance and less environmental pollution.

  Operation capacity

  The operation reliability is good, and the advanced design principle and processing method ensure the operation reliability of the whole machine, and the failure free time is more than 20000 hours. The lifting height is high The hoist runs smoothly, so it can reach a high lifting height.

  service life

  The service life is long, the feeding of the elevator adopts inflow type, there is no need to dig materials with bucket, and there is little extrusion and collision between materials. The machine is designed to ensure that materials are less scattered during feeding and unloading, so as to reduce mechanical wear.

  working principle

  The hopper scoops up the materials from the storage below, and with the conveyor belt or chain lifting to the top, it turns down after bypassing the top wheel, and the bucket elevator dumps the materials into the receiving tank. The drive belt of bucket elevator with belt drive generally adopts rubber belt, which is installed on the lower or upper drive drum and the upper and lower change direction drum. Chain driven bucket elevator is generally equipped with two parallel transmission chains, with a pair of transmission sprockets on or below and a pair of reversing sprockets on or above. Bucket elevator is generally equipped with casing to prevent dust flying in bucket elevator.

Online Message

Submit

Products

Jiangsu liudao Heavy Industry Co., Ltd

Office address: room 901-903, block L, Zhengda Himalaya, Yuhuatai District, Nanjing, Jiangsu Province

Factory address: No. 16, Huashan Road, Gaochun Economic Development Zone, Nanjing



copyright ©  2022 Jiangsu liudao Heavy Industry Co., Ltd    Powered by www.300.cn    SEO